Skip to main content
Tool Belt Calc

Automotive

RPM at Speed Calculator

Engine rpm at any road speed from tires and gearing.

Your measurementsEvery assumption editable01

Top gear is often an overdrive below 1.00.

Engine speedCalculated live02

Result

2162rpm

2162 rpm at 70 mph

Road speed
70 mph
Tyre diameter710 revolutions per mile
28.4 in
Axle ratio
3.73:1
Transmission ratio
0.7:1
Engine speed
2162 rpm

The 336 constant folds together inches per mile and minutes per hour, which is why the formula looks arbitrary. It is just unit conversion.

Torque converter slip is not modelled. An automatic with the converter unlocked will turn a few hundred rpm above this figure; locked up, it will sit very close to it.

Use this to check a gearing change before committing. Cruising rpm that lands outside the engine's efficient band costs fuel whichever direction it misses by.

Enter road speed, tyre diameter, axle ratio and transmission ratio. This is the calculation to run before committing to a gearing or tyre change — cruising revs outside the engine's efficient band cost fuel in either direction.

Why use this tool?What it does differently03

Why use this tool?

The whole drivetrain

Tyre diameter, axle ratio and transmission ratio combine into one relationship. Change any and the others must be reconsidered.

Revolutions per mile

Shown alongside, which is the figure speedometer calibration actually works from.

Check before you commit

Model a re-gear or a tyre change before spending money on either.

Converter slip flagged

An automatic with the converter unlocked sits a few hundred rpm above this figure.

How this worksThe method04

How this rpm at speed calculator works

Engine speed is road speed multiplied by axle ratio, transmission ratio and a constant of 336, divided by tyre diameter in inches. The 336 folds together inches per mile and minutes per hour, which is why it looks arbitrary — it is pure unit conversion.

Revolutions per mile follows from tyre circumference: 63,360 inches in a mile divided by the tyre's circumference. That figure is what a speedometer calibration module is actually programmed with.

Torque converter slip is not modelled. An automatic with the converter unlocked turns a few hundred rpm above this; locked up, it sits very close to it.

How to use itStep by step05

How to use it

  1. Step 1: Enter road speed

    The cruising speed you actually care about, usually motorway pace.

  2. Step 2: Enter tyre diameter

    Overall diameter in inches — use the tire size calculator if you only have the size code.

  3. Step 3: Enter both ratios

    Axle ratio from the differential tag, transmission ratio for the gear in question.

  4. Step 4: Compare against the powerband

    Cruising outside the engine's efficient range costs fuel whichever way it misses.

Example usageWorked figures06

Example usage

Highway cruising
70 mph on 28.4 in tyres with 3.73 gears and a 0.70 overdrive gives 2,162 rpm — comfortable long-legged cruising.
After a re-gear
The same vehicle re-geared to 4.10 turns 2,377 rpm at the same speed. Better acceleration, measurably worse economy.
After a tyre increase
Going from 28.4 to 32 in tyres on the original 3.73 gears drops cruising revs to 1,919 — which sounds efficient but often puts the engine below its torque band, causing constant downshifting.
Frequently asked questionsCommon questions07

Frequently asked questions

How do I calculate engine rpm at a given speed?

Multiply speed in mph by the axle ratio, the transmission ratio and 336, then divide by tyre diameter in inches. The 336 is a unit conversion constant.

What is a good cruising rpm?

It depends entirely on the engine. Most modern petrol engines are efficient between about 1,800 and 2,500 rpm at cruise; diesels are usually lower. Very low revs in too tall a gear can cost economy rather than save it.

Does this account for torque converter slip?

No. An automatic with the converter unlocked runs a few hundred rpm above this figure. Locked up, it will be very close.

How do I find my tire diameter?

Use the tire size calculator with your size code, or measure the mounted tyre's height directly.

Why did my truck get worse after bigger tires?

Taller tyres act like a numerically lower gear ratio. The engine drops below its efficient band at cruise, so it downshifts constantly and economy falls rather than improving.

Related toolsElsewhere on the site08

Browse every tool in Automotive Calculators.